• Off—The drive is not in use and can be safely
removed.
• Green—The drive is in use and functioning properly.
• Green, blinking—The driver is initializing following
insertion or the driver is unloading following an eject
command.
• Amber—The drive has failed.
• Amber, blinking—Drive locate function activated in
the software.
NVMe SSD drive fault
NVMe SSD drive tray LEDs have different
behavior than SAS/SATA drive trays.
Note
1
NVMe
• Off—No drive activity.
• Green, blinking—There is drive activity.
NVMe SSD activity2
NVMe
• Off—There is no AC power to the server.
• Amber—The server is in standby power mode. Power
is supplied only to the Cisco Integrated Management
Controller (Cisco IMC) and some motherboard
functions.
• Green—The server is in main power mode. Power is
supplied to all server components.
Power button or LED3
• Off—The unit identification function is not in use.
• Blue, blinking—The unit identification function is
activated.
Unit identification4
Cisco Secure Network Server 3600 Series Appliance Hardware Installation Guide
6
Cisco Secure Network Server 3600 Series Appliance Overview
Front Panel LEDs
To Next Page
Loading...
