EasyManuals Logo
Home>Cisco>Switch>SF352-08P

Cisco SF352-08P Administration Guide

Cisco SF352-08P
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
Administration: Discovery
Discover - LLDP
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 137
9
To configure LLDP MED on each port:
STEP 1 Click Administration > Discovery - LLDP > LLDP MED Port Settings.
This page displays the following LLDP MED settings for all ports (only fields not described in
the Edit page are listed):
• User Defined Network Policy—Policies are defined for types of traffic (called
application). This is defined in the LLDP MED Network Policy. In this case, the
following information is displayed for the policy on the port:
- Active—Is the type of traffic active on the port.
- Application—Type of traffic for which the policy is defined.
• Location—Whether Location TLV is transmitted.
• PoE—Whether PoE-PSE TLV is transmitted.
• Inventory—Whether Inventory TLV is transmitted.
STEP 2 The message at the top of the page indicates whether the generation of the LLDP MED
Network Policy for the voice application is automatic or not (see LLDP Overview). Click on
the link to change the mode.
STEP 3 To associate additional LLDP MED TLV and/or one or more user-defined LLDP MED
Network Policies to a port, select it, and click Edit.
STEP 4 Enter the parameters:
• Interface—Select the interface to configure.
• LLDP MED Status—Enable/disable LLDP MED on this port.
• SNMP Notification—Select whether SNMP notification is sent on a per-port basis
when an end station that supports MED is discovered; for example a SNMP managing
system, when there is a topology change.
• Selected Optional TLVs—Select the TLVs that can be published by the device by
moving them from the Available Optional TLVs list to the Selected Optional TLVs list.
• Selected Network Policies—Select the LLDP MED policies to be published by LLDP
by moving them from the Available Network Policies list to the Selected Network
Policies list. These were created in the LLDP MED Network Policy page. To include
one or more user-defined network polices in the advertisement, you must also select
Network Policy from the Available Optional TLVs.

Table of Contents

Other manuals for Cisco SF352-08P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SF352-08P and is the answer not in the manual?

Cisco SF352-08P Specifications

General IconGeneral
BrandCisco
ModelSF352-08P
CategorySwitch
LanguageEnglish

Related product manuals