EasyManuals Logo
Home>Cisco>Switch>SF352-08P

Cisco SF352-08P Administration Guide

Cisco SF352-08P
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #719 background imageLoading...
Page #719 background image
Smart Network Application (SNA)
Operations
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 493
25
• Client Explorer
Device Explorer
This explorer provides additional information on full SNA devices and their interfaces.
It displays a table view of the ports and existing LAGs in the switch. Every entry in the table
has several basic columns, and a small number of additional columns that appear only when
the relevant overlay is active.
From here, you can also edit and save the device's host name.
The following columns are displayed in the Device Explorer table:
• Port/LAG Name — Full interface name.
• Unit ID — Displays only in the port table and for stacked switches.
• Port Type — Displays only in the port table. Physical type of the port.
• Admin Status — The interface’s administrative status.
• Operational Status — The interface’s operational state. If the interface is
suspended, the suspension reason appears in parenthesis.
• LAG Membership — Displays only in the port table. If the port is a member of a
LAG, this column shows the LAG ID.
• Port Members — Displays only in the LAG table. Displays a list of the ports that
are members in this LAG. This field may contain a long list of ports. If the complete
list does not fit in the table, it may be viewed on the right-hand information.
• Description — Description of the interface. Uses the MIB ifAlias.
• When the Link Utilization overlay is selected, the following columns are displayed:
- Current Speed — Current speed of the interface (10M, 100M, 1G…).
- Tx Utilization — Tx utilization of the interface as a percentage of the current
speed. This column is not displayed for LAGs.
- Rx Utilization — Rx utilization of the interface as a percentage of the current
speed. This column is not displayed for LAGs
• When the PoE overlay is selected, the following columns are displayed:
- Maximum Power Allocation — Displays only in the port table. Displays the
maximum power allocation in MW. If a port does not support PoE, shows N/A.

Table of Contents

Other manuals for Cisco SF352-08P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SF352-08P and is the answer not in the manual?

Cisco SF352-08P Specifications

General IconGeneral
BrandCisco
ModelSF352-08P
CategorySwitch
LanguageEnglish

Related product manuals