Need help?Do you have a question about the Cisco SG350X-24P and is the answer not in the manual?
Lists all items included in the switch package.
Details required cables, tools, and compatible computers for initial setup.
Tips on suitable locations and environmental conditions to avoid.
Instructions for installing the switch into a standard 19-inch rack.
Steps for connecting computers, printers, and other devices to the switch.
Overview of Cisco 350X switches with Power over Ethernet capabilities and port support.
Lists default username, password, and IP address for initial access.
Guide to accessing the switch via web interface, including IP address and login steps.
Instructions for configuring the switch using the console port and command-line interface.
Explains how to stack up to four Cisco 350XG switches and necessary cable types.
Lists different Cisco 350X switch models and their basic descriptions.
Describes the physical layout of the front panel, including ports and LEDs.
Details on USB, RJ-45, Multigigabit, PoE, SFP+, and OOB ports.
Explains the meaning of various LEDs on the front panel for status indication.
Instructions on how to use the reset button for rebooting or factory resets.
Identifies the power and console ports located on the back panel.
Steps to restore the switch to its original factory default settings.
Guides on testing network reachability and resolving common issues like power, connectivity, and IP addressing.
Provides links to Cisco support communities, firmware downloads, and product documentation.
To Next Page
General
