Cisco SNS3515 - Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware Appliances

CHAPTER 3
Install the Cisco SNS 3515 and Cisco SNS 3595
Hardware Appliances
•
Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware Appliances, page 19
•
Cisco Integrated Management Controller, page 31
Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware
Appliances
This section describes how to install your Cisco SNS 3515 or 3595 appliance and connect it to the network.
It contains:
•
Install the Cisco SNS 3515 or 3595 Appliance in a Rack, on page 20
•
Cisco Integrated Management Controller, on page 31
•
Connect Cables, on page 25
•
Connect and Power On the Cisco SNS 3515 or 3595 Appliance, on page 29
Before you begin the installation, read the Regulatory Compliance and Safety Information for the Cisco SNS
3515 or Cisco SNS 3595 Hardware Appliance.
Warning: Only trained and qualified personnel should be allowed to install, replace, or service this
equipment.
Statement 1030
Warning
Warning: This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
Cisco SNS 3500 Series Appliance Hardware Installation Guide
19