Connect Cables 25
Connect the Network Interface 26
Ethernet Port Connector 26
Connect the Console 27
Connect the Keyboard and Video Monitor 28
Cable Management 29
Connect and Power On the Cisco SNS 3515 or 3595 Appliance 29
Connect and Power On the Server (Standalone Mode) 29
Local Connection Procedure 30
Remote Connection Procedure 30
Cisco Integrated Management Controller 31
Setup CIMC Configuration Utility 31
NIC Modes and NIC Redundancy Settings 33
Upgrade the BIOS and Cisco IMC Firmware 34
Access the System BIOS 36
Cisco SNS 3500 Series Appliance Hardware Installation Guide
iv
Contents
To Next Page
Loading...
