Voice Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 132
6
<CWT2_Cadence> Cadence script for distinctive CWT 2.
Default setting: 30(.1/.1, .1/9.7)
<CWT3_Cadence> Cadence script for distinctive CWT 3.
Default setting: 30(.1/.1, .1/.1, .1/9.7)
<CWT4_Cadence> Cadence script for distinctive CWT 4.
Default setting: 30(.1/.1, .3/.1, .1/9.3)
<CWT5_Cadence> Cadence script for distinctive CWT 5.
Default setting: 1(.5/.5)
<CWT6_Cadence> Cadence script for distinctive CWT 6.
Default setting: 30(.3/.1,.3/.1,.1/9.1)
<CWT7_Cadence> Cadence script for distinctive CWT 7.
Default setting: 30(.3/.1,.3/.1,.1/9.1)
<CWT8_Cadence> Cadence script for distinctive CWT 8.
Default setting: 2.3(.3/2)
<Ring1_Name> Name in an INVITE’s Alert-Info Header to pick distinctive ring/
CWT 1 for the inbound call.
Default setting: Bellcore-r1
<Ring2_Name> Name in an INVITE’s Alert-Info Header to pick distinctive ring/
CWT 2 for the inbound call.
Default setting: Bellcore-r2
<Ring3_Name> Name in an INVITE’s Alert-Info Header to pick distinctive ring/
CWT 3 for the inbound call.
Default setting: Bellcore-r3
<Ring4_Name> Name in an INVITE’s Alert-Info Header to pick distinctive ring/
CWT 4 for the inbound call.
Default setting: Bellcore-r4
<Ring5_Name> Name in an INVITE’s Alert-Info Header to pick distinctive ring/
CWT 5 for the inbound call.
Default setting: Bellcore-r5
<Ring6_Name> Name in an INVITE’s Alert-Info Header to pick distinctive ring/
CWT 6 for the inbound call.
Default setting: Bellcore-r6
To Next Page
Loading...
