Router Configuration Parameters
<PHY_Port_Setting> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 156
7
<PHY_Port_Setting> Example: Flow control enabled with
auto-negotiated duplex mode
<router-configuration>
...
<PHY_Port_Setting>
<Flow_Control>1</Flow_Control>
<Speed_Duplex>auto</Speed_Duplex>
</PHY_Port_Setting>
...
</router-configuration>
<Speed_Duplex> Description: The port speed and duplex mode
User Interface: Interface Setup > Advanced Settings > Port
Setting page, Speed Duplex field
Values:
auto
10h
10f
100h
100f
Default: auto
Example: 100 Mbps, half-duplex mode
<Speed_Duplex>100h</Speed_Duplex>
Parameter Details
To Next Page
Loading...
