Cisco SPA1112 - Page 171

Router Configuration Parameters
<SNMP> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 171
7
<Get_Community> Description: A community string for authentication for SNMP GET
commands.
User Interface: Administration > Management > SNMP page,
SNMP section, Get/Trap Community field
Values: string
Default: public
Example:
<Get_Community>MyGet</Get_Community>
<Set_Community> Description: A community string for authentication for SNMP GET
commands.
User Interface: Administration > Management > SNMP page,
SNMP section, Set Community field
Values: string
Default: private
Example:
<Set_Community>MySet</Set_Community>
<SNMPV3> User Interface: Administration > Management > SNMP page,
SNMPV3 section, Enable and Disable fields
Values:
0: Disabled
1: Enabled
Default: 0
Example: SNMPv3 enabled
<SNMPV3>1</SNMPV3>
Parameter Details