Cisco SPA1112 - Page 175

Router Configuration Parameters
<SNMP> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 175
7
</router-configuration>
<SNMP> Example 2: SNMPv3 Enabled from Trusted IP
Address
<router-configuration>
...
<SNMP>
<SNMP_Enabled>1</SNMP_Enabled>
<SNMP_Trusted_IP>209.165.202.129/255.255.255.0</SNMP_Trusted_IP>
<Get_Community>MyGet</Get_Community>
<Set_Community>MySet</Set_Community>
<SNMPV3>1</SNMPV3>
<RW_User>MyUsername</RW_User>
<Auth_Protocol>SHA</Auth_Protocol>
<Auth_Password>MyPassword</Auth_Password>
<Privacy_Protocol>DES</Privacy_Protocol>
<Privacy_Password>MyPrivacyPassword</Privacy_Password>
<TRAP_IP_Address>209.165.201.1</TRAP_IP_Address>
<TRAP_Port>162</TRAP_Port>
<TRAP_SNMP_Version>v3</TRAP_SNMP_Version>
</SNMP>
...
<router-configuration>