Cisco SPA1112 - Page 177

Router Configuration Parameters
<Time_Setup> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 177
7
<Time_Server_Mode> Description: The method for specifying an NTP time server Time
Server Address
User Interface: Network Setup > Basic Setup > Time Settings
page, Time Server field
Values:
manual
auto
Default: auto
Example: Manual mode
<Time_Server_Mode>manual</Time_Server_Mode>
<Time_Server> Description: IPv4 address or domain name of an NTP server
User Interface: Network Setup > Basic Setup > Time Settings
page, Time Server Address field
Values: IPv4 address or domain name
Default: 0.ciscosb.pool.ntp.org
Example: European pool
<Time_Server>server 0.europe.pool.ntp.org </Time_Server>
<Resync_Timer> Description: The interval, in seconds, at which the ATA
resynchronizes with the NTP server
User Interface: Network Setup > Basic Setup > Time Settings
page, Resync Timer field
Values: number
Default: 3600
Example:
<Resync_Timer>3600</Resync_Timer>
Parameter Details