Cisco SPA1112 - Page 196

Router Configuration Parameters
<Log_Configuration> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 196
7
<Syslog_Server_IP> Description: The IP address of the syslog server where the
messages will be sent
User Interface: Administration > Log > Log Setting page, Syslog
Server section, IP Address field
Values: IPv4 address
Default: null
Example:
<Syslog_Server_IP>209.165.202.129</Syslog_Server_IP>
<Syslog_Server_Port> Description: The port to use on the specified syslog server
User Interface: Administration > Log > Log Setting page, Syslog
Server section, Port field
Values: number from 1~65535
Default: 514
Example:
<Syslog_Server_Port>514</Syslog_Server_Port>
<MAIL_Sender> Description: A valid email address from which to send the logs
User Interface: Administration > Log > Log Setting page, E-Mail
section, Sender field
Values: email address, including domain, such as
user1@example.com
Default: null
Example:
<MAIL_Sender>user1@example.com</MAIL_Sender>
Parameter Details