Cisco SPA1112 - Page 201

Router Configuration Parameters
<Log_Configuration> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 201
7
<RAM> Description: Enables or disables capturing the specified logs in the
Log Viewer
User Interface: Administration > Log > Log Module page, Local
field
Values:
0: Disabled
1: Enabled
Default: 0
Example: Logs will be available in the Log Viewer
<RAM>1</RAM>
<Syslog> Description: Enables or disables including the specified logs in the
file that is sent to the Syslog Server
User Interface: Administration > Log > Log Module page, Syslog
Server field
Values:
0: Disabled
1: Enabled
Default: 0
Example: Logs will be sent to a Syslog Server
<Syslog>1</Syslog>
Parameter Description