In-House Preprovisioning and Provisioning Servers
Provisioning Server Setup
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 45
3
Syslog Server
If a syslog server is configured on the ATA (using the <Syslog_Server> or
<Debug_Server> parameters), the resync and upgrade operations log messages
to the syslog server. A message can be generated at the start of a remote file
request (configuration profile or firmware load), and at the conclusion of the
operation (indicating either success or failure).
The logged messages themselves are configured in the following parameters:
• For profile resync:
- Log_Resync_Request_Msg
- Log_Resync_Success_Msg
- Log_Resync_Failure_Msg
• For firmware upgrades:
- Log_Upgrade_Request_Msg
- Log_Upgrade_Success_Msg
- Log_Upgrade_Failure_Msg
These parameters are macro expanded into the actual syslog messages.
As indicated in the lower half of the diagram, a Cisco Client Certificate Root
Authority signs each unique certificate. The corresponding root certificate is made
available to service providers for client authentication purposes.
To Next Page
Loading...
