Cisco SPA112 Administration Guide

Administration Settings
Management
Cisco SPA100Series Administration Guide 110
5
TR-069
Use the Administration > Management > TR-069 page to configure
communication with an Auto-Configuration Server (ACS) via TR-069 CPE WAN
Management Protocol (CWMP). TR-069 (Technical Report 069) provides a
common platform to manage all voice devices and other customer-premises
equipment (CPE) in large-scale deployments. It provides the communication
between the CPE and the ACS.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
Field Description
Status Click Enabled to enable remote provisioning, or click
Disabled to disable this feature. The default setting is
Disabled.
ACS URL The URL for the ACS. The format should be http(s)://
xxx.xxx.xxx.xxx:port or xxx.xxx.xxx.xxx:port. The
xxx.xxx.xxx.xxx is the domain name or IP address of the
ACS server. Both the IP address and the port number
are required.
ACS Username The username for the ACS. The default username is the
Organization Unit Identifier (OUI). This value is required
and must match the username configured on the ACS.
ACS Password The password for the ACS. This value is required and
must match the password configured on the ACS.
Connection Request
Port
The port to use for connection requests
Connection Request
Username
The username for connection requests. This value must
match the Connection Request Username configured on
the ACS.
Connection Request
Password
The password for connection requests. This value must
match the Connection Request Password configured on
the ACS.
Periodic Inform
Interval
If Periodic Inform is enabled, the duration, in seconds,
between CPE attempts to connect to the ACS. The
default value is 86400 seconds.

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g