Cisco SPA112 Administration Guide

Configuring the Voice Settings
Information
Cisco SPA100Series Administration Guide 44
4
Information
Use the Voice > Information page to view information about the ATA voice
application.
Enter the settings as described below. After making changes, click Submit to
save your settings, or click Cancel to redisplay the page with the saved settings.
Product Information
System Status
Field Description
Product Name Model number/name.
Serial Number Product serial number.
Software Version Software version number.
Hardware Version Hardware version number.
MAC Address MAC Address. For example: 8843E1657936.
Client Certificate Status of the client certificate, which can indicate if the
ATA was authorized by your ITSP.
Customization Used for Remote Configuration by service providers who
deploy the ATA to their customers.
• Open: Not a Remote Configuration unit. This ATA
can be configured by using the configuration utility.
• Pending: This Remote Configuration unit has not
yet connected to the server to get its profile.
• Customized: This Remote Configuration unit has
received its profile from the server.
Field Description
Current Time Current date and time of the system; for example, 10/3/
2003 16:43:00. Set the system time by using the Network
Setup > Time Settings page.

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g