Cisco SPA112 Administration Guide

Configuring the Voice Settings
Regional
Cisco SPA100Series Administration Guide 78
4
CW Per Call Deact
Code
Disables call waiting for the next call.
Default setting: *70
Block CID Act
Code
Blocks caller ID on all outbound calls.
Default setting: *67
Block CID Deact
Code
Removes caller ID blocking on all outbound calls.
Default setting: *68
Block CID Per Call
Act Code
Blocks caller ID on the next outbound call.
Default setting: *81
Block CID Per Call
Deact Code
Removes caller ID blocking on the next inbound call.
Default setting: *82
Block ANC Act
Code
Blocks all anonymous calls.
Default setting: *77
Block ANC Deact
Code
Removes blocking of all anonymous calls.
Default setting: *87
DND Act Code Enables the do not disturb feature.
Default setting: *78
DND Deact Code Disables the do not disturb feature.
Default setting: *79
CID Act Code Enables caller ID generation.
Default setting: *65
CID Deact Code Disables caller ID generation.
Default setting: *85
CWCID Act Code Enables call waiting, caller ID generation.
Default setting: *25
CWCID Deact
Code
Disables call waiting, caller ID generation.
Default setting: *45
Dist Ring Act Code Enables the distinctive ringing feature.
Default setting: *26
Dist Ring Deact
Code
Disables the distinctive ringing feature.
Default setting: *46
Field Description

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g