Cisco SPA122 Administration Guide

Configuring the Voice Settings
User 1 and User 2
Cisco SPA100Series Administration Guide 102
4
Speed Dial Settings
Supplementary Service Settings (User)
Field Description
Speed Dial 2-9 Target phone number (or URL) assigned to speed dial 2, 3,
4, 5, 6, 7, 8, or 9.
Default setting: blank
Field Description
CW Setting Call Waiting on/off for all calls.
Default setting: yes
Block CID Setting Block Caller ID on/off for all calls.
Default setting: no
Block ANC Setting Block Anonymous Calls on or off.
Default setting: no
DND Setting DND on or off.
Default setting: no
CID Setting Caller ID Generation on or off.
Default setting: yes
CWCID Setting Call Waiting Caller ID Generation on or off.
Default setting: yes
Dist Ring Setting Distinctive Ring on or off.
Default setting: yes

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg