Cisco SPA122 Administration Guide

Using the IVR for Administration
Cisco SPA100Series Administration Guide 133
8
Set Network Mask 121 To enter the value, press numbers on
the telephone key pad. Press the *
(star) key to enter a decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check Gateway IP
Address
130
Set Gateway IP Address 131 To enter the value, press numbers on
the telephone key pad. Press the *
(star) key to enter a decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check MAC Address 140
Check Firmware Version 150
Check Primary DNS
Server Setting
160
Set Primary DNS Server 161 To enter the value, press numbers on
the telephone key pad. Press the *
(star) key to enter a decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check INTERNET web
server port
170
SPA122 only: Check LAN
IP address (ETHERNET
port)
210
Announce Line 1 SIP
Tran sp or t
1910
IVR Action Menu
Option
Choices and Instructions

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg