Cisco SPA122 Administration Guide

Getting Started
Configuration and Management of the ATA
Cisco SPA100Series Administration Guide 16
1
–Press 1 to save the IP address or press the * (star) key to cancel your
entry and return to the main menu.
IVR Actions
IVR Action Menu
Option
Choices and Instructions
Enter IVR Menu ****
Check Internet Connection
Type
100
Set Internet Connection
Type
101 DHCP: 0
Static IP: 1
PPPoE: Press 2
PPPoE, DHCP: Press 3
DHCP, PPPoE: Press 4
Check Internet IP Address
(WAN port)
110
Set Static IP Address
(WAN)
111 Enter the IP address by
using numbers on the
telephone key pad. Use the
* (star) key when entering a
decimal point.
Note: This option is
available only after you
choose Static IP as the
Internet Connection Type,
through option 101.
Check Network Mask 120
Set Network Mask 121
To enter the value, press
numbers on the telephone
key pad. Press the * (star)
key to enter a decimal
point.
Note: This option is
available only after you
choose Static IP as the
Internet Connection Type,
through option 101.

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg