Cisco SPA122 Administration Guide

Getting Started
Elements of the User Interface
Cisco SPA100Series Administration Guide 22
1
Saving the Settings
Your settings on a configuration page are not saved until you click the Submit
button. When you navigate to another page, any unsaved settings are abandoned.
Changes cannot be saved while calls are in progress. Try again when the phones
are idle.
To clear the settings without saving them, you can click the Cancel button.
Help
To view information about the configuration pages, click the Help link near the top
right corner of the configuration utility. You can then use the table of contents to
find topics of interest.
Logout
To exit the configuration utility, click the Logout link near the top right corner of the
window. The Login page appears. You can close the browser window.

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg