EasyManuals Logo

Cisco SPA122 Administration Guide

Cisco SPA122
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Configuring the Voice Settings
Line1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide 86
4
SIP Settings
Field Description
SIP Transport The TCP choice provides “guaranteed delivery”, which
assures that lost packets are retransmitted. TCP also
guarantees that the SIP packages are received in the
same order that they were sent. As a result, TCP
overcomes the main disadvantages of UDP. In addition, for
security reasons, most corporate firewalls block UDP
ports. With TCP, new ports do not need to be opened or
packets dropped, because TCP is already in use for basic
activities such as Internet browsing or e-commerce.
O p t i o n s a r e : U D P, T C P, T L S .
Default setting: UDP
SIP Port Port number of the SIP message listening and
transmission port.
Default setting: 5060
SIP 100REL Enable To enable the support of 100REL SIP extension for reliable
transmission of provisional responses (18x) and use of
PRACK requests, select yes. Otherwise, select no.
Default setting: no
EXT SIP Port The external SIP port number.
Default setting: blank
Auth Resync-
Reboot
If this feature is enabled, the ATA authenticates the sender
when it receives the NOTIFY resync reboot (RFC 2617)
message. To use this feature, select yes. Otherwise, select
no.
Default setting: yes
SIP Proxy-Require The SIP proxy can support a specific extension or
behavior when it sees this header from the user agent. If
this field is configured and the proxy does not support it, it
responds with the message, unsupported. Enter the
appropriate header in the field provided.
Default setting: blank
SIP Remote-Party-
ID
To use the Remote-Party-ID header instead of the From
header, select yes. Otherwise, select no.
Default setting: yes

Table of Contents

Other manuals for Cisco SPA122

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA122 and is the answer not in the manual?

Cisco SPA122 Specifications

General IconGeneral
Ports2 FXS ports
Network Interface10/100 Mbps Ethernet
Voice ProtocolSIP
Voice CodecsG.711, G.726, G.729 A
SecurityTLS
Power Supply5V DC, 2A
Network Ports1 x 10/100 Mbps
Fax SupportT.38 fax relay
Operating Temperature0°C to 45°C
Storage Temperature14 to 140°F (-10 to 60°C)
Humidity10% to 90% noncondensing
Weight0.16 kg

Related product manuals