Cisco SPA502G Configuring

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
10. Enable the provision and set the “Profile Rule” with the following string
“http://tftp.jingl.com.au/$MA.cfg”
11. Click on “Submit All Changes” button to save the configuration
12. Restart the phone for the new settings to take place, the phone will download and
configure all settings from the provisioning server as well as any necessary firmware
files.

Cisco SPA502G Specifications

General

Lines	1
Protocol	SIP
Power over Ethernet (PoE)	Yes
Speakerphone	Yes
Headset Port	Yes
Ethernet Ports	1 x 10/100 Mbps
Voice Codecs	G.711, G.729