Need help?Do you have a question about the Cisco Small Business SPA502G and is the answer not in the manual?
General| Display | Monochrome LCD |
|---|---|
| Speakerphone | Yes |
| Headset Port | Yes, 2.5mm |
| Protocols | SIP, SPCP |
| Power over Ethernet (PoE) | Yes |
| Voice Codecs | G.711, G.729 |
| Power | PoE or optional 5V DC power adapter |
| Line Support | 1 line |
| Ethernet Ports | 2 (10/100 Mbps) |
Describes the purpose and scope of the user guide.
Provides a general introduction to the IP phones covered.
Offers guidance on maintaining the phone's condition.
Explains the physical components and their functions.
Details methods for faster menu navigation and operation.
Lists prerequisites and checks before installing the phone.
Illustrates how to connect cables and ports on the phone.
Step-by-step instructions for attaching the handset.
Guide on using the phone's desktop stand.
Instructions for wall-mounting the device.
Explains how to secure the handset when wall-mounted.
Details how to supply power to the IP phone.
Outlines steps for network connectivity via Ethernet.
Explains how to connect via a wireless bridge.
Describes how to connect a computer through the phone.
Instructions for using headsets with the phone.
Steps to confirm the phone is operational after installation.
Information on how the phone's software is updated.
Covers basic interaction with the phone's physical parts.
Explains how to control audio levels and mute calls.
Basic procedures for initiating and receiving calls.
Details how to place calls on hold and retrieve them.
Instructions on how to mute microphone during calls.
Steps to properly terminate an active call.
Explains methods for transferring calls to other extensions.
How to redial the last called or other numbers.
Guide to checking and calling back missed calls.
Describes how to redirect incoming calls.
Instructions to prevent incoming calls from ringing.
How to answer calls ringing on other extensions.
Steps to initiate a multi-party conference call.
How to access and use the phone's internal contact list.
Guide to viewing past incoming, outgoing, and missed calls.
Instructions on how to check voice messages.
Describes the process of using extension mobility.
How to set up speed dial entries.
Detailed steps for managing speed dials.
Functionality to check other lines.
Options for personalizing the phone's display.
How to change the incoming call alert sound.
Specific IVR menu usage.
Information for IT support.
Steps to access the phone's web configuration.
Setting up speed dials via the web interface.
How to update login credentials.
Configuring alerts for new voicemails.
Initial setup for the console.
Step-by-step for attaching one console.
Step-by-step for attaching a second console.
How to set up the attendant console features.
General operational guide for the console.
How to check the status of the attendant console.
Lists available support and documentation links.
Provides references to related Cisco documentation.
To Next Page
