Cisco Small Business SPA502G

2
Cisco Small Business Pro IP Phone SPA50X User Guide (SPCP) 15
Installing Your Phone
This chapter describes how to install your Cisco Small Business IP Phone and
connect it to your network. It contains the following sections:
• Before You Begin, page 15
• Phone Connections, page 16
• Connecting the Handset, page 17
• Installing the Stand (Optional), page 17
• Mounting the Phone to the Wall (Optional), page 18
• Connecting the Power, page 23
• Connecting Your Phone to the Network, page 24
• Connecting a PC to Your Phone (Optional), page 25
• Connecting Wired and Wireless Headsets (Optional), page 25
• Verifying Phone Startup, page 26
• Upgrading Your Phone’s Firmware, page 27
Before You Begin
Before you install and connect your phone, verify with your System Administrator
(if applicable) that the network is ready for the phone, read the safety notices, and
make sure you have all the phone parts and documentation available.
Before you install and connect your phone, verify with your System Administrator
(if applicable) that the network is ready for the phone, read the safety notices, and
make sure you have all the phone parts and documentation available.