Cisco Small Business SPA502G

Using Basic Phone Functions
Placing a Three-Way Conference Call
Cisco Small Business IP Phone SPA 50X User Guide (SPCP) 37
3
STEP 3 When the second person answers, press the Confrn softkey again. All three
parties are connected in the conference call.
NOTE You can cancel the conference by pressing the Cancel softkey before
connecting the calls.
When you hang up, the other two parties are disconnected.
Cisco SPA 501G:
STEP 1 Press the Conference button during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.
STEP 3 When the second person answers, press the Conference button again. All three
parties are connected in the conference call.
When you hang up, the other two parties are disconnected.