Need help?Do you have a question about the Cisco SPA303 and is the answer not in the manual?
General| Display | Monochrome LCD |
|---|---|
| Lines | 3 |
| Speakerphone | Yes |
| Headset Jack | Yes (2.5 mm) |
| Handset | Yes |
| Ethernet Ports | 2 x 10/100 Mbps |
| Protocol | SIP |
| Power | Power over Ethernet (PoE) or AC adapter |
| Audio Codec Support | G.711, G.729 |
| QoS | 802.1p/q |
Provides an overview of Cisco Small Business IP Phones and their VoIP capabilities.
Details the features and buttons of the Cisco SPA 301 IP phone.
Details the features and buttons of the Cisco SPA 303 IP phone.
Step-by-step guide for connecting the handset, power, and network for SPA 301.
Step-by-step guide for connecting the handset, power, and network for SPA 303.
Instructions on how to update the phone's firmware using Cisco Configuration Assistant.
Basic steps for making and receiving calls using the phone.
How to place calls on hold and resume them.
Explains how to perform attended and blind call transfers.
Configuring call forwarding to send all incoming calls to a different number.
How to log in and out of the phone system using Extension Mobility.
Steps to add, edit, delete, and use speed dial entries on the phone.
How to adjust LCD screen contrast and configure the screen saver.
Links to Cisco support communities, resources, and firmware downloads.
To Next Page
