Cisco SPA303 User Manual

Using Basic Phone Functions
Using Mute (Cisco SPA 303)
Cisco Small Business IP Phone SPA 30X User Guide (SPCP) 32
3
Using Mute (Cisco SPA 303)
When Mute is enabled, you can hear other parties on a call, but they cannot hear
you. You can use this feature on the handset, speakerphone, or headset.
• To toggle Mute on: Press the Mute button. The LED is lit.
• To toggle Mute off: Press the lit Mute button.
Ignoring an Incoming Call When You Are on a Call
Ending a Call
To end a call:
• Press the EndCall button (Cisco SPA 303).
• If you are using the handset, hang up.
• If you are using the speakerphone, press the Speaker button (Cisco SPA 303).
• If you are using the headset, either press the Headset button (wired) or replace
the handset (wireless) - Cisco SPA 303.
Transferring Calls (Cisco SPA 303)
You can perform two types of transfers:
• Attended—You call the person to whom you are transferring the call and
speak to them before transferring the call.
• Blind—You transfer the call without speaking to the other party to which you
are transferring the call.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q