Using Basic Phone Functions
Using Phone Hardware and Accessories (Cisco SPA 303)
Cisco Small Business IP Phone SPA 30X User Guide (SPCP) 29
3
Using Phone Hardware and Accessories (Cisco SPA 303)
Using the Speakerphone
To use the speakerphone, press the Speaker button (the handset can be either on
or off hook).
Using the Headset with Your IP Phone
Install the headset as described in the “(Optional) Connecting Wired and
Wireless Headsets” section on page18.
NOTE Steps to use your headset with the IP phone may vary. Consult the user
documentation for your headset for more information.
Press the Headset button on your phone and dial the number to place a call, or
press the headset button to answer a ringing call.
Switching Between the Handset/Headset/Speakerphone
During a Call
Any of these audio devices can be used during a call. Only one device at a time
can be used.
The handset can be on the hook when using the speakerphone or headset
function. If switching from the handset to the speakerphone, make sure the
speakerphone or headset light is illuminated before placing the handset back on
the hook.
Adjusting Call Volume and Muting
Adjusting Call Volume
Cisco SPA 301
With the headset off the phone, press the Vol. button repeatedly to increase the
volume. When the volume reaches the maximum, the next button press reduces
the volume to the minimum.
To Next Page
Loading...
Need help?
General
