Need help?Do you have a question about the Cisco SPA 303 and is the answer not in the manual?
General| Keypad number of keys | 12 |
|---|---|
| Display resolution | 128 x 64 pixels |
| Call waiting | Yes |
| Lines quantity | 3 lines |
| Phonebook capacity | 60 entries |
| Do not disturb function | No |
| Voice codecs | G.711, G.722 |
| Supported network protocols | IPv4 (RFC 791), ARP, DNS (RFC 1706), SRV (RFC 2782), DHCP (RFC 2131), ICMP (RFC 792), TCP (RFC 793), UDP (RFC 768), RTP (RFC 1889, 1890), RTCP (RFC 1889), RTCP-XR (RFC 3611), DiffServ (RFC 2475), ToS (RFC 791, 1349), SNTP (RFC 2030) |
| Headphone outputs | 1 |
| Ethernet LAN (RJ-45) ports | 2 |
| Suitable for use in country/location | Europe |
| Input voltage | 100 - 240 V |
| Dimensions (WxDxH) | 220 x 30 x 198 mm |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Product type | IP Phone |
| Product color | Gray |
| Certification | FCC (15, B), UL, CE, A-Tick |
| Compliance industry standards | IEEE 802.1p/Q, IEEE 802.3 |
Weight and Dimensions| Weight | 680 g |
|---|
Details methods for placing calls using handset, speakerphone, or headset, including hot dialing.
Describes methods for answering incoming calls using handset, speakerphone, or headset.
Details how to set up static forwarding to send all incoming calls to a specific number or extension.
Introduces creating conferences, including joining two calls and adding calls.
Explains call transfer and its two methods: consultative (warm) and blind transfer.
Introduces Call Park, allowing calls to be held and retrieved from any phone in the same group.
Explains answering calls at other phones and lists three types: Directed, Any, and Group Pickup.
Details initiating and ending call recording during a conversation using the *80 command.
Guides initial voicemail setup, PIN, greeting, and retrieving messages from desk phone.
Provides instructions for retrieving voicemail messages remotely by dialing the desk phone.
Provides steps to access the voicemail box through a personal website login.
Lists initial steps before installation, including receiving equipment and accessing the Admin Portal.
Illustrates supported and unsupported methods for connecting desk phones to the network.
Explains how phones are assigned extensions/numbers and where to find this information.
Describes various ways to install desk phones, including wired and wireless connections.
Explains how to set up wireless connectivity using a transmitter and adapter.
Instructs on the process of activating phone lines and the service.
Provides essential safety precautions for using telephone equipment to prevent hazards.
To Next Page
