Need help?Do you have a question about the Cisco SPA 303g and is the answer not in the manual?
General| Lines | 3 |
|---|---|
| Power over Ethernet | Yes |
| Speakerphone | Yes |
| Handset | Yes |
| Display | 128 x 64 pixels |
| Ethernet Ports | 2 |
| Audio Codecs | G.711, G.729 |
| Headset Port | Yes |
| Protocols | SIP |
| Power | 5V DC |
Provides instructions and diagrams for physically connecting the Cisco SPA 303 IP Phone.
Details the steps for connecting the handset cord to the Cisco SPA 303 IP phone.
Explains how to connect the power cord and Ethernet cable to the Cisco SPA 303 IP phone.
Step-by-step guide on how to perform an attended call transfer.
Step-by-step guide on how to perform an unattended (blind) call transfer.
Instructions for forwarding all incoming calls to another number using softkeys or setup menu.
Explains how to configure call forwarding when the phone is busy.
Instructions for forwarding calls when there is no answer.
Explains how to stop call forwarding using a softkey or the setup menu.
Steps to activate Do Not Disturb using a softkey or the setup menu.
Steps to deactivate Do Not Disturb using a softkey or the setup menu.
Steps to park an active call on a designated line.
Instructions on how to unpark a call by knowing the line number or from a list.
Step-by-step guide on how to initiate a three-way conference call.
Instructions on setting or changing the phone password to prevent unauthorized use.
Explains how to access voicemail using the Messages button or by changing the voicemail number.
Information on configuring and using different types of speed dials.
Steps to create speed dials assigned to unused line buttons on the phone.
How to create speed dials that are assigned to numbers on the keypad.
Steps to obtain the phone's IP address and log into its web interface.
To Next Page