To Next Page

To Previous Page

Setting or Changing a Phone Password

You can set or change the password for your phone to prevent unauthorized use. To set a

password for your phone:

STEP 1 Press the Setup button.

STEP 2 Scroll to

Set Password

and press the

select

softkey.

STEP 3 Enter a numeric password. Enter the same password twice.

STEP 4 Press the

save

softkey.

Accessing Voicemail

To access voicemail, press the

Messages

button on your phone. Your system administrator

should configure your phone with the correct voicemail number so that pressing the

Messages

button automatically dials your voicemail system.

If you need to change the number that is dialed to access your voicemail, perform the following

steps:

STEP 1 Press the Setup button.

STEP 2 Scroll to

Voice Mail

and press the

select

softkey.

STEP 3 Enter the number to dial for voicemail. Enter the phone number, including any digits

you must dial to reach an outside line.

To clear the field of a previous entry, press the

clear

softkey.To enter letters, press the

Right

navigation button to scroll, then press the

alpha

softkey.

STEP 4 Press the

save

softkey.

Cisco SPA 303g User Manual

Questions and Answers: