Cisco SPA 303g - Adjusting Audio Volume; Changing the LCD Contrast

78
Adjusting Audio Volume
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
Under Audio Volume , you can adjust the following settings:
• Ringer Volume
• Speaker Volume (Not applicable to Cisco SPA 301)
• Handset Volume
• Headset Volume (Not applicable to Cisco SPA 301) Enter a volume between 1
and 10, with 1 being the lowest.
• Deep Bass—Enable to enhance low frequency audio.
STEP 3 Click Submit All Changes.
Changing the LCD Contrast
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
STEP 3 Under LCD , you can adjust the LCD contrast by entering a number between 1
and 10, with 1 being low contrast.
STEP 4 Click Submit All Changes.