Cisco SPA 303g User Manual

39
Switching Between Multiple Calls on Hold on a Single Line
You can have up to two calls on each phone line. If one or more calls on a line is on hold, the
black bar at the top of the screen shows the call that is on hold (indicated by the right arrow).
The call information at the bottom of the screen shows the active call.
To switch between two calls on a single line, press the flashing line button. If multiple calls are
on hold on multiple lines, use the navigation button to scroll up or down and press the flashing
line button for the call you have selected.
Ending a Call
To end a call:
• If you are using the handset, hang up.
• If you are using the speakerphone, press the Speaker button (Cisco SPA 303).
• If you are using the headset, either press the Headset button (wired) or replace the
receiver (when using certain wireless models) - Cisco SPA 303.

Cisco SPA 303g Specifications

General

Brand	Cisco
Model	SPA 303g
Category	IP Phone
Language	English