Cisco SPA 303g - Configuring the Phone Screen Saver

79
Configuring the Phone Screen Saver
To configure the phone screen saver:
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the Phone tab.
Under General, you can configure the following:
• Screen Saver Enable: Turns the screen saver on and off.
• Screen Saver Wait: The number of minutes that the phone is idle before the screen
saver starts.
• Screen Saver Icon: The display type:
- A background picture.
- The station time in the middle of the screen.
- A moving padlock icon. When the phone is locked, the status line
displays a scrolling message “Press any key to unlock your phone.”
- A moving phone icon.
- The station date and time in the middle of the screen.
STEP 3 Click Submit All Changes.