41
Performing an Unattended (Blind) Transfer
STEP 1 During an active call, press the
bXfer
softkey.
STEP 2 Enter the number to which you want to transfer the call and press the
dial
softkey.
The call is transferred with no further action required on your part.
Transferring a Held Call to an Active Call
If you have a call on hold and an active call, you can transfer one of these calls to the other call,
connecting the two callers. (This differs from a conference call because you no longer remain
part of the call after the transfer.)
With an active call and one or more calls on hold, press the
xferLx
softkey.
•
If you have only one call on hold, the call is transferred to the active party and you are
disconnected.
•
If you have more than one call on hold, choose the held call you want to transfer by
pressing the line button of the call on hold.
To Next Page
Loading...
