Cisco SPA303 User Manual

Cisco Small Business IP Phone SPA 30X User Guide (SPCP) 1
Contents
Chapter 1: Getting Started 4
About This Document 4
Overview of the Cisco Small Business IP Phones 6
Caring for Your Phone 7
Getting to Know the Cisco SPA 301 7
Getting to Know the Cisco SPA 303 9
Softkey Buttons 11
Using Keypad Shortcuts 12
Chapter 2: Installing Your Phone 13
Before You Begin 13
Installing Your Cisco SPA 301 IP Phone 14
Connecting the Handset 14
Connecting the Power 14
Connecting Your Cisco SPA 301 to the Network 15
Installing Your Cisco SPA 303 IP Phone 16
Connecting the Handset 16
Connecting the Power 17
Connecting Your Cisco SPA 303 to the Network 17
(Optional) Installing the Cisco SPA 303 Stand 18
(Optional) Connecting a PC to Your Cisco SPA 303 18
(Optional) Connecting Wired and Wireless Headsets 18
(Optional) Mounting Your Cisco SPA 30X Phone to the Wall 19
Reversing the Handset Retention Tab 25
Verifying Phone Startup 26
Upgrading Your Phone’s Firmware 27
Chapter 3: Using Basic Phone Functions 28
Using Phone Hardware and Accessories (Cisco SPA 303) 29
Using the Speakerphone 29
Using the Headset with Your IP Phone 29

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q