Cisco TelePresence Touch 10 - Put Call on Hold and Resume a Call on Hold; About Putting on Hold

D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
13
Putting someone on hold is typically
something you do as an initial
step when transferring someone
to another person, but it may also
be used when you need to consult
a person, or as an alternative to
muting where you will also include
stopping the video transmission.
Put Call on Hold and Resume a Call on Hold
About Putting on Hold
1 2
Video Calls
Assume that you are in a call. Tap
Hold.
Tap Resume to go back to the one
you were in call with (to undo your
action).