6 © 2014 Cisco and/or its affiliates. All rights reserved.
IO Throttle Count
Description: The total number of I/O requests that can be outstanding on a per-vHBA basis.
Parameter name: I/O Throttle Count
Parameter values:
Note: Prior to the UCSM 2.1.2a release, Cisco UCSM displayed an I/O Throttle Count parameter in the non-standalone Linux
and ESX Adapter Policies, and in the standalone Cisco Integrated Management Controller vHBA Properties field. This parameter
was programmatically ignored; modifying it had no effect on the actual adapter setting, which remained statically set. As of the
Cisco UCSM 2.1.2a release, this value is now honored.
Note: Some values’ actual parameter settings are different than what is displayed in the UCSM and Cisco Integrated
Management Controller (IMC) GUIs. These differences are implemented to support backward compatibility and forward
consistency.
UCSM GUI / CIMC GUI configurable range = 1 to 1024
UCSM GUI default (non-standalone) = 16 displayed / 2048 actual parameter setting
CIMC GUI default (standalone) = 512 displayed / 512 actual parameter setting
UCSM GUI / CIMC GUI < 256 displayed / 256 actual parameter setting
UCSM GUI / CIMC GUI = 16 displayed / 2048 actual parameter setting
Configuration capabilities: Boot time only.
To Next Page
Loading...
Need help?
General
