Cisco UCS 5108 User Manual

C07-730811-00 1/14
.
URL: www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Americas Headquarters
Cisco Systems, Inc.
San Jose, CA
Cisco Systems (USA) Pte. Ltd.
Singapore
Europe Headquarters
Cisco Systems International BV Amsterdam,
The Netherlands
Cisco Integrated Management Controller Standalone I/O Throttle Count Configuration
The I/O Throttle Count for standalone servers is configured in the Cisco Integrated Management Controller GUI.
To change the I/O Throttle Count parameter, log in to the CIMC, navigate to the Server tab, click the Summary link and then click
Power on Server. Once the server has been powered on, click the Inventory link, select the Cisco VIC Adapters tab, choose the
Adapter Card, and then select the vHBAs tab. Click fc0 or fc1, then click the Properties button. The vHBA Properties window
will display. Scroll down to the Fibre Channel Port section, configure the I/O Throttle Count field per the parameter values listed
above, then click the Save Changes button.
References
Virtual Interface Card Drivers Installation Guides
http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-manager/products-installation-guides-list.html
UCSM Managed and Standalone Compatibility Documents
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable