EasyManuals Logo
Home>Cisco>Server>UCS C220 M3

Cisco UCS C220 M3 Quick Start Guide

Cisco UCS C220 M3
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
78-21007-01
Performance Parameters
Virtual memory configured.
Windows firewall disabled.
Current Windows updates installed.
Windows Update settings set to “Check for updates but let me choose whether to download and
install them.
Tip Windows firewall is disabled by default. If you want to enable Windows firewall, follow these
steps:
a. Open Server Manager. (To open Server Manager, right-click Computer and click Manage. Or,
select Start > Programs > Administrative Tools > Server Manager.)
b. Under “Security Information,” click Go to Windows Firewall.
c. Under “Overview,” click Windows Firewall Properties.
d. Under “State,” change “Firewall State” to “On.
Note If you enable Windows firewall, all the required inbound ports for Security Manager are blocked by
default. You must ensure that required ports are enabled and available for use by Security Manager and
its associated applications on your server so that the server can communicate with clients and servers
running associated applications. To find the list of ports that are required to be enabled in Windows
firewall, refer to “Required Services and Ports” in the “Requirements and Dependencies” chapter of the
Installation Guide for Cisco Security Manager 4.3 at the following URL:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_ma
nager/4.3/installation/guide/requirem.html#wp1060450.
Cisco Security Manager tuning done (this was done by Cisco before shipment of the Bundle to you):
D:\Program Files\CSCOpx used for installation.
Default usernames and passwords established.
Performance Parameters
Your new Bundle was tuned for specific performance parameters:
The low-end hardware configuration (16 GB RAM, 4 x 500 GB HDD) provides support for 50 devices.
This configuration is suitable for a small enterprise deployment. The maximum number (cumulative) of
events per second supported is 5000 events per second [this value is a 9:1 ratio of syslogs to IPS SDEE
(i.e., 4500 syslog + 500 SDEE)].
Note Cisco does not recommend (1) attempting to expand the capabilities of the low-end hardware
configuration (16 GB RAM, 4 x 500 GB HDD) by adding licenses or hardware or (2) otherwise
attempting to change the license configuration or hardware or both; the Bundle was tested as shipped.

Other manuals for Cisco UCS C220 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS C220 M3 and is the answer not in the manual?

Cisco UCS C220 M3 Specifications

General IconGeneral
Tcase70 °C
Bus typeQPI
SteppingM1
FSB ParityNo
Scalability2S
Processor cache10 MB
Processor cores4
System bus rate6.4 GT/s
Processor seriesIntel Xeon E5-2600
Processor socketLGA 2011 (Socket R)
Processor codenameSandy Bridge EP
Processor frequency2.4 GHz
Processor cache typeSmart Cache
Processor manufacturerIntel
Processor package size52.5 x 45.0 mm
Processor front side bus- MHz
Processor boost frequency2.50 GHz
Processor operating modes64-bit
ECC supported by processorYes
Graphics & IMC lithography32 nm
PCI Express configurationsx4, x8, x16
Supported instruction setsAVX
Thermal Design Power (TDP)80 W
Number of processors installed2
CPU multiplier (bus/core ratio)24
Physical Address Extension (PAE)46 bit
Maximum number of PCI Express lanes40
Memory types supported by processorDDR3-SDRAM
Memory channels supported by processorQuad
Memory clock speeds supported by processor800, 1066 MHz
Memory bandwidth supported by processor (max)34.1 GB/s
Maximum internal memory supported by processor750 GB
HDD size2.5 \
HDD interface-
Total storage capacity500 GB
Compatible memory cardsSD
Maximum storage capacity- TB
Memory slots16
Internal memory32 GB
Memory clock speed1866 MHz
Maximum internal memory- GB
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports3
Chassis typeRack (1U)
Power supply450 W
SafetyUL 60950-1 No. 21CFR1040, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943 2001
Certification47CFR Part 15 (CFR 47), AS/NZS CISPR22, CISPR2 2, EN55022, ICES003, VCCI, EN61000-3-2, EN61000-3-3, KN22, CNS13438, EN55024, CISPR24, EN300386, KN24
Operating altitude0 - 3000 m
Non-operating altitude0 - 12000 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 93 %
Operating relative humidity (H-H)10 - 90 %
PCI Express slots version3.0
Processor ARK ID64588
Intel Secure Key Technology version1.00
Intel Identity Protection Technology version0.00
Harmonized System (HS) code84714100
Weight and Dimensions IconWeight and Dimensions
Depth724 mm
Width430 mm
Height43.2 mm

Related product manuals