Cisco WAP571 - Chapter 8: Client Quality of Service; Client Qos Global Settings

8
Cisco WAP571/E Administration Guide 121
Client Quality of Service
This section provides an overview of Client quality of service (QoS) and explains
the QoS features available from the Client QoS menu. It contains these topics:
• Client QoS Global Settings
• Class Map
• Policy Map
• Client QoS Association
• QoS Status
Client QoS Global Settings
You can use the Client QoS Global Settings page to enable or disable quality of
service functionality on the WAP device.
If you disable Client QoS, rate limiting, and DiffServ configurations are globally
disabled.
If you enable this mode, you can also enable or disable Client QoS mode on
particular VAPs or Ethernet. See the Client QoS Mode setting on the Client QoS
Association page.