Need help?Do you have a question about the Cisco Webex Room Kit Plus and is the answer not in the manual?
General| Megapixel | 15.1 MP |
|---|---|
| Camera type | Quad camera |
| Sensor type | CMOS |
| Digital zoom | 5 x |
| White balance | Auto |
| Optical sensor size | 1/1.7 \ |
| Vertical field of view | 51.5 ° |
| Horizontal field of view | 83 ° |
| Number of camera presets | 4 |
| F-number (relative aperture) | 2 |
| Horizontal field of view (tele) | 50 ° |
| HD type | - |
| Maximum frame rate | 60 fps |
| Maximum video resolution | 5120 x 2880 pixels |
| Product color | Grey, White |
| Line-in | Yes |
| USB 2.0 ports quantity | 1 |
| Cable lock slot type | Kensington |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 35 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| DC input voltage | 12 V |
| Power source type | DC |
| Power consumption (max) | 70 W |
| Power consumption (typical) | 20 W |
Weight and Dimensions| Depth | 103 mm |
|---|---|
| Width | 950 mm |
| Height | 120 mm |
| Weight | 4800 g |
Lists all items included in the product packaging for user verification.
Identifies accessories and components available for separate purchase.
Essential safety precautions and hardware requirements for secure installation.
Specifies necessary airflow clearances and lists required tools for setup.
Guidance on optimal camera placement based on screen mounting height.
Instructions for positioning the camera below the screen when its height exceeds 120 cm.
Instructions for positioning the camera above the screen when its height is below 120 cm.
Step-by-step instructions for installing the Quad Camera's wall mounting bracket.
Critical reminder about measurements for proper camera tilt functionality.
Procedure for securely fastening the Quad Camera onto its mounted bracket.
Guide to selecting the correct camera tilt based on mounting height and provided table.
Instructions to measure camera height and consult a table for the appropriate tilt angle.
Detailed steps for fine-tuning the camera's tilt angle using adjustment mechanisms.
Instructions for connecting essential cables to the Cisco Webex Codec Plus unit.
Instructions for connecting the necessary cables to the Quad Camera.
Steps to return the Quad Camera to its normal, upright orientation.
Guide to finish the initial configuration and setup of the system software.
Advises users to update the system software for enhanced features and performance.
Procedure for safely detaching the Quad Camera from its installed wall bracket.
Crucial safety notice regarding the camera's release levers to prevent accidental detachment.
To Next Page