EasyManua.ls Logo

Cisco Webex Room Kit Pro User Manual

Cisco Webex Room Kit Pro
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cisco Webex Room Kit Pro
Installation Guide
FR
Guide d’installation
ES
Guía de instalación
PT
Manual de Instalação
IT
Guida per l’installazione
DE
Installationshandbuch
Question and Answer IconNeed help?

Do you have a question about the Cisco Webex Room Kit Pro and is the answer not in the manual?

Cisco Webex Room Kit Pro Specifications

General IconGeneral
PTZ controlYes
Product typePersonal video conferencing system
Product colorWhite
Tilt angle range-20 - 20 °
Number of persons1 person(s)
Display diagonal10 \
Display resolution1280 x 800 pixels
Viewing angle, vertical48.8 °
Viewing angle, horizontal80 °
Internal memory4064 MB
Storage temperature (T-T)10 - 90 °C
Operating temperature (T-T)0 - 40 °C
Interface module RJ-45 ports quantity1
Megapixel- MP
Sensor typeCMOS
Digital zoom2 x
Optical zoom10 x
Image sensor size- \
Video codecsH.264, G.711, G.722, G.729, G.729ab, G.722.1, AAC-LD, Opus
Maximum frame rate60 fps
Supported video modes720p, 1080p, 2160p
Resolution at capture speed1920x1080@30fps
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Data link protocolsEthernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, Bluetooth 4.0, IEEE 802.11ac
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsTCP/IP, NTP, DHCP, DNS
Current3 A
DC input voltage12 V
Harmonized System (HS) code85176990

Summary

Box contents

Can be ordered separately

Safety and mounting hardware

Tools you may need

Ventilation

Mount the codec in a rack (optional)

Decide where to position the Quad Camera

Mount the Quad Camera wall bracket

Side view

Illustrates the side perspective of the wall bracket installation for clarity.

Attach the Quad Camera to the bracket

Decide the tilt angle for the Quad Camera

Adjust the tilt angle for the Quad Camera

Connect the antennas to the codec

Connect the codec cables

Connect the Quad Camera cables

Tilt the Quad Camera back to normal position

Connect the PTZ 4K camera cables (optional)

Connect the Precision 60 camera cables

Turn on the codec

Complete the software setup

How to release the Quad Camera from the wall bracket

Related product manuals