Cisco Wide Area Virtualization Engine 594 and 694 - Cabling

3-7
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
OL-24619-02
Chapter 3 Installing the WAVE-594 and WAVE-694
Rack Mounting and Cabling the WAVE-594 and WAVE-694
Figure 3-5 Rack-mounting the Chassis
Step 4 Verify that the chassis is securely installed in the rack.
Cabling
Use the following information (see Figure 3-6) when connecting peripheral cables to the WAVE
appliance.
Warning To reduce the risk of electric shock, fire, or damage to the equipment, do not plug telephone or
telecommunications connectors into RJ-45 connectors.