EasyManua.ls Logo

Cisco Wide Area Virtualization Engine 594 and 694 - Interface Module Specifications

Cisco Wide Area Virtualization Engine 594 and 694
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A-3
Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide
OL-24619-02
Appendix A WAVE-594 and WAVE-694 Hardware Specifications
Interface Module Specifications
Interface Module Specifications
Table A-2 describes the Interface Module technical and general specifications.
Table A-2 Inline Network Adapter Specifications
Specification Description
Copper Gigabit Ethernet Bypass (4-port and 8-port)
IEEE standard Gigabit Ethernet, 1000BASE-T, IEEE 802.3-2000
Fast Ethernet, 100BASE-T, IEEE 802.3-2000
Ethernet, 10BASE-T, IEEE 802.3-2000
Duplex Supports both half-duplex and full-duplex operation in all operating
speeds
Autonegotiation Autonegotiates between full-duplex and half-duplex operations and
between 1000 Mbps, 100 Mbps, and 10 Mbps speeds
Data transfer rate 1000 Mbps, 100 Mbps, and 10 Mbps speeds per port in half-duplex
mode
2000 Mbps, 200 Mbps, and 20 Mbps speeds per port in full-duplex mode
Ports 4-Port Interface Module: 4 × RJ-45 socket connectors
8-Port Interface Module: 8 × RJ-45 socket connectors
Fiber Optic Gigabit Ethernet Bypass (4-port)
IEEE standard Gigabit Ethernet, 1000BASE-SX, IEEE 802.3-2000
Duplex Supports full-duplex only
Optical reach 137 m (449 ft) to any individual port to account for 274 m (899 ft) total
when operating in bypass mode
Data transfer rate 2000 Mbps
Ports 4 Fixed LC Duplex Connectors
SFP+ 10 Gigabit Ethernet (2-port)
IEEE standard The Cisco 10 Gigabit Ethernet Interface Module for WAAS only
supports Cisco pluggable optical transceiver modules. Consult the
following data sheet URL for supported modules:
Cisco 10GBASE SFP+ Modules
Duplex Supports full-duplex only
Autonegotiation Autonegotiates pluggable transceiver type 1 Gbps or 10 Gbps
Data transfer rate 2000 Mbps and 20,000 Mbps
Ports 2-Port Interface Module: 2 Pluggable SFP/SFP+ sockets
Optical reach Varies per module type. Consult the following data sheet URL for
supported modules:
Cisco 10GBASE SFP+ Modules
General Technical Specifications
Dimensions 38 mm (1.5 in) H x 121 mm (4.75 in) W x 264 mm (10.38 in) D
Weight 0.73 kg to 0.91 kg (1.61 lb to 2.01 lb)

Table of Contents

Related product manuals