• Toadjust the seconds, press button® to
return
the settingto "00"seconds to
start.
• Each press on button ® switches the watch between 12-hour and 24-hour
system.
• Each press on button® adjusts Analog1
("Hour"
and
"Mimute"
blinksimulta
neously) in 1/3 minute (20-second intervals) in clockwise direction. Adjust the
Analog 1 indication to
show
the
same
time as the digital indication.
• Each press on button ® adjusts Analog 2
("00"
and "Analog2 identification
mark" blink simultaneously) in clockwise direction in 1-division intervals.
Set
to
the
0-second
position (12 o'clock).
(4) Press button
<§)
to returnto normalTime
display.
•
The
"Second" indication of Analog 2 is interlocked with the "Second" indi
cation
of
the
digital
time.
• Make
sure
that
the
AM (A)/PM (P) indication is correct
when
setting
the
time
in
the
12-hour
display
system.
•
Auto-Return
to
the
normal
Time
display will
be
activated
when
the
watch
is left in
the
adjustment
mode
(flashing display) for
more
than
2
minutes.
•
Instant
Manual
Return
to normal
Time
display
can
be
made
by
pressing
button
<@)
inTime adjustment mode.
To Next Page
Loading...
