Citizen Ana-Digi Temp JG2 - All-Reset Function

11. All-Reset Function
Use All-Reset Function to reset the watch after replacing the battery or if the
watch is showing abnormal display or operation due to a strong shock or static
electricity(no display,alarm keeps on sounding etc.). All-ResetFunctioncan be
performed as follows.
24
"V-
/
Sffi=£Mta
M s PUT,
1*S
ALMlCHI
BB.B°e
<AII-Reset Function>
(1) Press buttons ®, ® , © and (0)si
multaneously.
(2) Release the button.
(3) Press one of the buttons. This com
pletes the All-Reset operation. After
All-Reset operation, adjust the time or
modes correctly.