Citizen Ana-Digi Temp JG2 - How to Use Alarm

7. How to Use Alarm <ALM>
Once this alarm has been set (ON), the alarm will sound for about 20 seconds
every day at the same time. When the alarm is set, the temperature is automati
cally measured at the set alarm time and displayed as a temperature memo.
16
[Normal Alarm Display (ON)]
\-rr
I / I X ^
TOJE-s
k
®
ms-JH-yWm
' 5--3D
St3i
]«
Temperature Memo
Set Time
Alarm ON Mark
<Setting Alarm>
(1) Press and holdbutton® in Alarm
mode for 2 seconds or more.
"Hours" starts flashing and be
comes an adjustment mode.
(2) Press button ® to adjust the
"Hour". (Press and holdbutton®
for rapid advancement.)
(3) When button® is pressed while
the "Hour" flashes, the "Minute"
starts flashing.
(4) Press button ® to adjust the
"Minute".
(5) Press button© to returnto nor
mal display.