Citizen Ana-Digi Temp JG2 - Page 20

' In the Alarm adjustment mode, Analog 2 display shows the alarm set time
as reference display.
When the time mode is indicated as a 12-hour system, the alarm time is
also indicated as a 12-hour system indication. Pay attention to the AM (A)
and PM (P) indications when setting the alarm.
r Auto-Return to normal Alarm display will be activated
when the watch is left
in
adjustment mode (flashing display) for more than 2 minutes.
' Instant Manual Return to normal Alarm display can be made by pressing
button (0)in Alarmadjustment mode.
' The recorded temperature memo is indicated until the temperature is again
recorded at the next set time or until a new alarm is set.
17